Ceramic face seal.
Height-adjustable float switch.
* Duration may vary based on your Shipping Address.
-All Products are subject to Stock availability at the time of Order in Qatar. Kindly proceed to check out and place the order.
-Our team will quickly check the physical stock and provide the order confirmation within 2-4 working hours.
-Note: Your Online Card payment will NOT be processed unless availability is confirmed. You only Pay for what is available.
Larger water volumes are its specialty: the SP 5 Dirt dirty water pump, with a maximum capacity of 9,500 l/h, reliably pumps dirty water with dirt particles up to 20 millimeters in size, e.g. from garden ponds or flooded cellars. For larger dirt, an optional prefilter protects against blockages. The slide ring sealing, which is familiar from the professional sector, has been installed to extend the lifetime of the device. The submersible pump has a float switch for automatically switching on and off. In addition, the float is fixed to a rail and is vertically adjustable. This allows water to be pumped out at a lower level. In manual mode, it can even pump out down to a residual water level of 25 millimeters. And the Quick Connect connection thread enables particularly quick and uncomplicated connection of 1 1/4" hoses.
Max. motor rating (W): 500
Max. flow rate (l/h): 9500
Delivery temperature, max. (°C): 35
Delivery height / Max. pressure (m/bar): 7 / 0,7
Max. grain size (mm): 20
Max. immersion depth (m): 7
Min. residual water, manual (mm): 25
Residual water height (mm): 25
Connection thread: G1
Pressure-side connection thread: G1 internal thread
Power cable (/m): H05RN-F / 10
Voltage (V): 230 - 240
Frequency (Hz): 50
Dimensions (L × W × H) (mm): 229 x 238 x 303
Weight without accessories (kg): 4,7
Comfortable carrying handle
Hose connection piece, 1 1/4''
Easy hose connection thanks to Quick Connect
Switching between manual/automatic operation, Possibility of fixing the float switch
The flexible, height-adjustable float switch
In automatic operation (auto), the pump automatically switches with the water level
In manual operation, the pump runs continuously until the minimum quantity of residual water is reached